資料介紹:
A - 2 A - 2
[Installation Precautions]
!
CAUTION
• Use the programmable controller in the operating environment that meets the general
specifications given in the CPU module used. Using this programmable controller in an
environment outside the range of the general specifications could result in electric shock, fire,
erroneous operation, and damage to or deterioration of the product.
• While pressing the installation lever located at the bottom of module, insert the module fixing tab
into the fixing hole in the base unit until it stops. Then, securely mount the module with the fixing
hole as a supporting point.
Incorrect loading of the module can cause a malfunction, failure or drop.
When using the programmable controller in the environment of much vibration, tighten the
module with a screw.
Tighten the screw in the specified torque range.
Undertightening can cause a drop, short circuit or malfunction.
Overtightening can cause a drop, short circuit or malfunction due to damage to the screw or
module.
• Completely turn off the externally supplied power used in the system before mounting or
removing the module. Not doing so could result in damage to the product.
For remote I/O stations of function version D or later, online module change can be performed.
However, the modules which can be replaced online are limited, and replacement procedures
are determined for each module. For details, refer to the section of online module replacement
in this manual.
伺服馬達 HF-SP201
輸出模塊 FX2N-16EYR-ES/UL
伺服電機電源用電纜 MR-PWS1CBL5M-A1-L
DC 輸入/晶體管輸出模塊 AJ65SBTB32-16DT
CPU組件 A1SJHCPU
伺服電機 HC-KFS053BD
模塊 AJ71PT32-S3
I/O總線監測模塊 A1SS91
定位模塊 AD71S2
伺服電機 HC-SFS524
輸入模塊 AJ65SBTB2N-8A
伺服馬達 HA-LFS30K1M4
串行通信模塊 A1SJ71QC24N1-R2
MODBUS接口模塊 A1SJ71UC24-R4-S2
晶體管漏型輸出模塊 A1SY42
編碼器電纜 MR-JHSCBL20M-L
電磁制動器用電纜 MR-BKS1CBL10M-A1-H
伺服電機 HC-SFS52K
伺服驅動器 MR-J2S-40B
伺服驅動器 MR-J2S-20A
定位模塊模塊 AJ65BT-D75P2-S3
背光燈 GT15-70SLTT
空蓋 A1SG60
DC型輸入模塊 QX82-S1
伺服電機 HC-KFS73B
PLC FX2NC-16MR-T-DS
電源模塊 A1S63P
GT15人機界面 GT1555-QSBD
伺服馬達 HA-LFS45K1M4
繼電器輸出模塊(彈簧夾接線端子) QY10-TS