三菱 手冊 三菱-手冊_IB(NA)-66715-I
所屬類別：三菱
>> 伺服驅動器和伺服電機
資料介紹：
[Mounting Instructions]
!
CAUTION
Use the PLC within the general specifications environment given in this manual.
Using the PLC outside the general specification range environment could lead to electric
shocks, fires, malfunctioning, product damage or deterioration.
Always securely insert the module latches at the bottom of the module into the fixing holes on
the base unit. (Always screw the AnS Series module onto the base unit with the specified
torque.)
Improper mounting of the module could lead to malfunctioning, faults or dropping.
Securely connect the external device connection connector, SSCNET connection connector
and peripheral device connection connector into the module connector until a click is heard.
Improper connection could lead to a connection fault, and to incorrect inputs and outputs.
When not connecting the external device, always install a cover on the connector section.
Failure to observe this could lead to malfunctioning.
模塊 AJ35PP-CNV-GI
模塊 A1SJ71ID1-R4
模塊 AJ35PTC-CNV-GI
模塊 AJ35PTC-CNV-SI
模塊 A1SJ71ID2-R4
適配器 Q6DIN2
模擬量輸出模塊 A616DAI
模塊 AD32ID2
中繼模塊 AJ65BT-RPI-10B
模塊 AD35ID2
適配器 Q6DIN1A
中斷模塊 AI61
模塊 A1SD32ID1
模塊 A1SD32ID2
模塊 AD32ID1
外部輸入/輸出單元 GT15-DIOR
速中斷模塊 A1SI61
適配器 Q6DIN3
轉換電纜 FX2N-CNV-IF
模擬輸出模塊 A616DAI
外部輸入/輸出單元 GT15-DIO
模擬量輸出模塊 Q68DAV，Q68DAI
模擬量輸入模塊 Q68ADV，Q68ADI
電流輸出模擬量模塊 Q68DAIN
模塊 A1SD35ID2
適配器 Q6DIN1
RS-232C通訊用模塊 FX2N-232IF
仿真單元 A6SIM-X64Y64
CCLink模塊 AJ65BT-64DAI
轉換適配器 FX2NC-CNV-IF
上一條：
下一條：相關下載
