三菱 三菱-Serial Communication 模塊 用戶手冊(硬件).pdf
資料介紹：
[Installation Instructions]
CAUTION
z Use the programmable controller in an environment that meets the general
specifications contained in the user's manual of the CPU module to use.
Using this programmable controller in an environment outside the range of
the general specifications could result in electric shock, fire, erroneous
operation, and damage to or deterioration of the product.
z While pressing the installation lever located at the bottom of module, insert
the module fixing tab into the fixing hole in the base unit until it stops. Then,
securely mount the module with the fixing hole as a supporting point.
Incorrect loading of the module can cause a malfunction, failure or drop.
When using the programmable controller in the environment of much
vibration, tighten the module with a screw.
z Tighten the screw in the specified torque range.
Undertightening can cause a drop, short circuit or malfunction.
Overtightening can cause a drop, short circuit or malfunction due to
damage to the screw or module.
z Completely turn off the externally supplied power used in the system before
mounting or removing the module.
Not doing so could result in damage to the product.
z Do not directly touch the conductive area or electronic components of the
module.
Doing so may cause malfunction or failure in the module.
輸入模塊 A1SX20EU
晶體管輸出模塊 AJ65VBTS2-16T
編碼器用接頭套件 MR-ENECNS
輸出模塊 A0J2-E24S
伺服控制器 MR-J2S-37KA
伺服放大器 MR-J2S-200A
定位控制模塊 A1SD75M1
保護膜 GT10-30PSCB
PLC FX1S-20MT-ES/UL
DC型輸入模塊 QX40-S1
保護膜 GT15-60PSGW
CPU單元 Q2ASCPU-S1
伺服電機 HC-KFS43K
薄型主基板 Q32SB，Q33SB，Q35SB
保護膜 GT16-70PSGW
伺服放大器 MR-J2S-55KB4
DC 輸入/晶體管輸出模塊 AJ65SBTB32-16KDT2
PLC FX2N-32MT-DSS
PLC FX3U-80MT/ES-A
保護膜 GT16-90PSCB
GOT到GOT長距離連接電纜 GT15-C200BS
plc FX1S-14MT-001
定位模塊 A62LS-S5
伺服馬達 HA-LFS12K1
定位控制模塊 A1SD75P2-S3
PLC FX3U-64MR/DS
模擬量模塊 AJ65SBT-64AD
運動CPU單元 A73CPU-S1
速計數(shù)模塊 A1SD62
帶基板的小點數(shù)CPU Q00JCPU-SET
上一條：
下一條：相關(guān)下載
