資料介紹:
[Design Instructions]
!
DANGER
• For data change, program change, and status control made to the PLC which is running from a
Personal computer, configure the interlock circui t externally so that the system safety is
ensured. The action to be taken for the system at the occurrence of communication errors
caused by such as loose cable connection must be determined for online operation of PLC from
Personal computers.
!
CAUTION
• Be sure to read the manual careful and exercise an appropriate amount of caution connecting to
PLC CPU and performing online operations (PLC CPU program change during RUN, forced
input/output operation, RUN-STOP or other operation condition changes, remote control
operation) while the personal computer is operating.
Regarding the PLC CPU program change during RUN (Write during RUN), the program may be
corrupted or have other problems depending on oper ation conditions. Exercise the appropriate
amount of caution with regard to the Caution points in section 16.9.
• Please refer to the manual of each module for online module change and swap module during
run, since there is restriction on the exchangeable module.
背光燈 GT15-90XLTT
RS-422電纜 GT10-C30R4-25P
模塊 AJ35PP-CNV-GI
模擬RGB電纜 GT15-C50VG
GT16觸摸屏 GT1675M-VTBA
GT15人機界面 GT1585-STBA
保護膜 GT15-50PSGW
GT16觸摸屏 GT1675-VNBA
GT16觸摸屏 GT1662-VNBD
GT10觸摸屏 GT1030-LWLW
保護膜 GT16-80PSCB
外部連接電纜 GT16H-C80-32P
QCPU(Q模式)用總線連接電纜 GT15-QC300BS
USB電纜 GT10-RS2TUSB-5S
總線連接單元 GT15-QBUS
背光燈 GT16-60VLTT
大型CPU擴展電纜 GT15-C12NB
RS-485端子臺轉換電纜 FA-LTBGTR4CBL05
GT15人機界面 GT1550-QLBD
可選功能板 GT15-FNB
緊停開關導桿 GT11H-50ESCOV
保護膜 GT15-70PSGW
背光燈 GT15-70SLTT
RS-422電纜 GT10-C300R4-8PC
A總線電纜用氧化鐵磁芯組(兩副) GT15-AFC
CC-Link模塊 AJ65BT-G4
GT15人機界面 GT1575-STBD
串行通信單元 GT15-RS4-9S
小型CPU擴展電纜 GT15-A1SC07NB
網絡模塊 AJ71LP21G