三菱 AS 三菱-AS-i Master 模塊 用戶手冊
資料介紹：
[DESIGN PRECAUTIONS]
!
DANGER
• If a communication error occurs in the AS-i system, the input will turn OFF from the slave having
the communication error.
Output to the slave having the communication error will be held or cleared depending on the
slave specifications.
The AS-i system communication error can be confirmed with the buffer memory's List of Active
Slaves (LAS) (15H to 18H) and with the input signal Configuration error (X4).
Using the above information, configure an interlock circuit on the sequence program so that the
system activates safely.
There is a risk of accidents caused by incorrect outputs or operations.
• Depending on the module fault, the input/output could enter ON or OFF status.
Provide an external monitoring circuit for I/O signals that could lead to major accidents.
!
CAUTION
• Do not bundle AS-i cable together with main circuit or power lines, or lay them close to these
lines.
As a guide, separate these lines by a distance of at least 100 mm, otherwise malfunctions may
occur due to noise.
CPU單元 A2ASCPU-S30
CPU單元 Q2ASCPU-S1
AC 輸入/可控硅輸出模塊 AJ35PTF-28AS
CPU單元 A2ASCPU-S1
輸入輸出模塊 A0J2-E28AS
AS-I主站模塊 FX2N-32ASI-M
輸入輸出模塊 A0J2-E56AS
AS-i模塊 QJ71AS92
CPU單元 A2ASCPU
CPU單元 Q2ASHCPU
As-i模塊 QJ71AS92
AC 輸入/可控硅輸出模塊 AJ35PTF-56AS
模塊 A1SJ71AS92
CPU單元 Q2ASHCPU-S1
CPU單元 Q2ASCPU
上一條：
下一條：相關下載
