資料介紹:
[Design Instructions]
!
DANGER
• Some failures of the GOT main unit, communication module, communication board or cable may
keep the outputs on or off.
An external monitoring circuit should be provided to check for output signals which may lead to a
serious accident.
Not doing so can cause an accident due to false output or malfunction.
• If a communication fault (including cable disconnection) occurs during monitoring on the GOT,
communication between the GOT and PLC CPU is suspended and the GOT becomes inoperative.
For bus connection : The CPU becomes faulty and the GOT inoperative.
For other than bus connection : The GOT becomes inoperative.
A system where the GOT is used should be configured to perform any significant operation to the
system by using the switches of a device other than the GOT on the assumption that a GOT
communication fault will occur.
Not doing so can cause an accident due to false output or malfunction.
!
CAUTION
• Do not bundle the control and communication cables with main-circuit, power or other wiring.
Run the above cables separately from such wiring and keep them a minimum of 100mm apart.
Not doing so noise can cause a malfunction.
PLC FX3G-60MT/ES-A
PLC FX3U-16MT/ESS
晶體管輸出模塊 AJ65SBTB2-16T
伺服放大器 MR-J2S-100A
模擬量溫度輸入模塊 AJ65SBT2B-64RD3
網絡模塊 A1SJ71QLP21
伺服驅動器 MR-J2S-60A4
溫度調節模塊 A1S64TCTRT
串行通信模塊 A1SJ71QC24N1-R2
伺服馬達 HA-LFS11K24
以太網接口模塊 A1SJ71E71-B2-S3
伺服電機 HC-RFS353
輸入模塊 A1SX10
伺服電機 HC-SFS102B
CPU組件 A2SHCPU
伺服控制器 MR-J2S-37KB
伺服馬達 HF-SP152B
PLC FX1N-60MR-ES/UL
MES接口模塊 QJ71MES96
編碼器接頭 MR-J3ENSCBL20M-L
以太網接口模塊 A1SJ71E71-B5-S3
GOT到GOT長距離連接電纜 GT15-C200BS
變頻器 FR-F740-S132K-CHT
伺服電機 HC-KFS053B
伺服電機 HC-SFS202
DC 輸入/晶體管輸出模塊 AJ65SBTC1-32DT
手持式觸摸屏 GT1665HS-VTBD
PLC FX3U-64MT/ES-A
模塊 AJ35PP-CNV-SI
伺服控制器 MR-J2S-15KA4