三菱 三菱-Structured Text (ST) Programming 指南 Book
資料介紹：
[Designing Precautions]
!
DANGER
• For data change, program change and status control to be performed for the running
programmable logic controller from a personal computer, configure interlock circuits in the
outside of the PLC system so that the whole system will always operate safely.
Also, for online operations to be performed from the personal computer to the PLC CPU,
predetermine as a system the corrective actions for communication errors that will occur due to
poor cable connection, etc.
[Startup/Maintenance Precautions]
!
CAUTION
• Before performing online operations (program change during PLC CPU RUN, forced I/O
operation, RUN-STOP or similar operating condition change, remote operation) with the
personal computer connected to the running PLC CPU, read the manual carefully and ensure
safety fully.
Note that program change during PLC CPU RUN (online change) may cause such problems as
program corruption depending on the operation condition. Use the equipment after fully
understanding the precautions given in the GX Developer Operating Manual.
支架 GT05-50STAND
GT16觸摸屏 GT1685M-STBA
GT15人機界面 GT1575V-STBA
GT16觸摸屏 GT1665M-STBA
支架 GT15-90STAND
GT15人機界面 GT1585V-STBD
GT15人機界面 GT1585-STBD
GT15人機界面 GT1585-STBA
GT15人機界面 GT1585V-STBA
GT16觸摸屏 GT1675M-STBD
端子排適配器 A1STA32
支架 GT15-80STAND
GT16觸摸屏 GT1675M-STBA
GT15人機界面 GT1575-STBA
GT15人機界面 GT1575V-STBD
支架 GT15-70STAND
GT16觸摸屏 GT1685M-STBD
GT15人機界面 GT1575-STBD
GT16觸摸屏 GT1665M-STBD
模擬定時器模塊 A1ST60
上一條：
下一條：相關(guān)下載
