資料介紹:
In this Installation Guide, instructions at a lower level than the above, instructions for other functions, and so on
are classified into "POINT".
After reading this Installation Guide, always keep it accessible to the operator.
Windows is a trademark of Microsoft Corporation.
The "Mitsubishi general-purpose AC servo MELSERVO Capacity Selection Software" is a production of
Mitsubishi Electric Corporation. Mitsubishi Electric Corporation reserves the copyright and all other rights of
this software.
This Installation Guide may not be reproduced or copied, in whole or part, without written consent of
Mitsubishi Electric Corporation.
All other company and product names contained in this Installation Guide are registered trademarks or
trademarks of their respective companies.
CAUTION
The capacity selection software calculated the system with theoretical equations
and can only be used as a guide to a suitable solution. Check the results against
your own requirements ensuring that you have an adequate safety margin in the
calculated result of the selected system in reserve.
伺服放大器 MR-J3-70A
編碼器用電纜 MR-EKCBL10M-H
編碼器電纜 MR-JHSCBL30M-H
編碼器接頭 MR-J3JCBL03M-A2-L
編碼器接頭 MR-J3ENCBL10M-A1-H
伺服控制器 MR-J2S-11KB4
CON2接頭 MR-J2CMP2
伺服放大器 MR-J3-500B
PLC FX1S-30MR-ES/UL
伺服驅動器 MR-J2S-100A4
編碼器接頭 MR-J2CNS
附件 MR-J2HBUS05M
接線端子塊 MR-TB20
伺服電機電源用電纜 MR-PWS2CBL03M-A2-L
伺服電機電源用電纜 MR-PWS1CBL5M-A2-H
伺服放大器 MR-J3-350A
PLC FX1S-14MR-D
編碼器電纜 MR-ENCBL20M-H
編碼器電纜 MR-JCCBL30M-H
電磁制動器用電纜 MR-BKS1CBL2M-A1-L
PLC FX3U-128MR/ES-A
伺服放大器 MR-J3-60B
編碼器接頭 MR-J3ENSCBL20M-H
PLC FX1S-30MR-DS
伺服放大器 MR-J3-700B
PLC FX1N-40MR-001
接頭套件 MR-ECN1
伺服放大器 MR-J2S-70B
伺服放大器 MR-J3-70B
PLC FX2N-80MR-001