資料介紹:
This manual has been written to be used by trained and competent personnel. The definition of such a
person or persons is as follows:
a) Any engineer using the product associated with this manual, should be of a competent nature,
trained and qualified to the local and national standards. These engineers should be fully aware of
all aspects of safety with regards to automated equipment.
b) Any commissioning or service engineer must be of a competent nature, trained and qualified to
the local and national standards.
c) All operators of the completed equipment should be trained to use that product in a safe and
coordinated manner in compliance to established safety practices.
Note: The term ‘completed equipment’ refers to a third party constructed device which contains or uses
the product associated with this manual.
Note’s on the Symbols Used in this Manual
At various times through out this manual certain symbols will be used to highlight points of information
which are intended to ensure the users personal safety and protect the integrity of equipment.
1) Indicates that the identified danger WILL cause physical and property damage.
2) Indicates that the identified danger could POSSIBLY cause physical and property
damage.
• Under no circumstances will Mitsubishi Electric be liable or responsible for any consequential damage
that may arise as a result of the installation or use of this equipment.
• All examples and diagrams shown in this manual are intended only as an aid to understanding the
text, not to guarantee operation. Mitsubishi Electric will accept no responsibility for actual use of the
product based on these illustrative examples.
• Owing to the very great variety in possible application of this equipment, you must satisfy yourself as
to its suitability for your specific application.
Associated Manual
PLC FX1N-40MR-001
RS-422擴展板 FX1N-422-BD
模擬量輸入擴展板 FX1N-2AD-BD
模擬量輸出擴展板 FX1N-1DA-BD
輸出擴展板 FX1N-2EYT-BD
RS-485擴展板 FX1N-485-BD
PLC FX1N-14MT-D
PLC FX1N-60MR-D
PLC FX1N-60MT-ESS/UL
擴展板 FX1N-8AV-BD
可編程控制器 FX1N-24MT-001
可編程控制器 FX1N-24MR-001
PLC FX1N-14MR-D
PLC FX1N-40MR-ES/UL
PLC FX1N-24MR-ES/UL
可編程控制器 FX1N-40MT-001
顯示模塊 FX1N-5DM
PLC FX1N-40MT-ES/UL
可編程控制器 FX1N-60MT-001
存儲卡 FX1N-EEPROM-8L
可編程控制器 FX1N-14MR-001
PLC FX1N-24MT-D
PLC FX1N-24MR-D
輸入擴展板 FX1N-4EX-BD
可編程控制器 FX1N-60MR-001
PLC FX1N-14MT-ES/UL
PLC FX1N-14MT-001
PLC FX1N-40MR-D
PLC FX1N-60MR-DS
PLC FX1N-40MR-DS